Product Introduction

PA05 Anchor Clamps for ADSS Cables

Designed for conductors with cross-sections of 3.5–6 mm², this clamp is specifically engineered to anchor and secure the ends of 1kV low-voltage, ultra-thin insulated conductors. It is suitable for anchoring low-current auxiliary leads and small-gauge lighting branch wires. Featuring a compact structure, it offers flexible and convenient installation and removal; the clamping force is optimized to secure the wire without damaging the core, making it an ideal tension clamp for ultra-thin, low-voltage conductors.

Technical Parameters

Model	Applicable wire gauge (mm²)	tensile load(KN)	voltage level
PA4.16-35	4×16-35	2.5	1KV
PA05	3.5-6	2.5-3	1KV
PA2.1	6~25	3.5	1KV
PA50	10-50	6	1KV
PA70	25-70	8	1KV
PA06	4.5-7	4	1KV
PA2.35	2×16-34	5	1KV

Detailed technical parameters

Anchor Clamps for ADSS Cables

Model: PA05

Applicable Cable Cross-section: 3.5–6 mm²; Tensile Load: 2.5–3 kN; Voltage Rating: 1 kV

Product Features

Features of the PA05 Anchor Clamps for ADSS Cables

Material: Compact, weather-resistant PA66 housing paired with a small-diameter stainless steel bail; tensile load range of 2.5–3 kN; suitable for tensioning the ends of 3.5–6 mm² ultra-thin insulated wires.

Manufacturing: Compact, miniature one-piece injection-molded structure; small, self-locking design allows for flexible installation and removal, making it ideal for anchoring wires in confined spaces.

Corrosion Resistance: Metal components undergo rust-proof passivation treatment; the plastic housing is UV-resistant and prevents moisture ingress, thereby avoiding oxidation, corrosion, or loosening at the clamping point.

Standards: Suitable for 1 kV low-voltage distribution lines; complies with industry manufacturing standards for electric power fittings, including GB/T2314, GB/T2315, DL/T764, and DL/T284.