Compression Equipment Terminal Clamp

Compression Equipment Terminal Clamp
Details
Product Model: SYG-70
Place of Origin: Guangdong, China
Minimum Order Quantity: 100 units
Packaging: Wooden crate/Carton
Lead Time: 15–30 days
Shipping Method: Container
Standards: Complies with GB/T 2314, GB/T 2315, DL/T 764, and DL/T 284.
Sample Service: Provided free of charge to distributors
Category
Copper Aluminum Equipment Clamps
Share to
Send Inquiry
Description

 

Product Introduction

 

SYG-70 Compression Equipment Terminal Clamp

 

Suitable for conductors with a cross-sectional area of 70 mm², specifically designed for wiring in 10 kV rural feeder distribution equipment, suitable for copper-to-aluminium cable transitions in small transformers and junction boxes in villages and towns. Dual compression holes ensure a secure crimp, with low contact resistance and minimal heat generation; a universal transition clamp for medium and small cross-sectional overhead lines.

 

Technical Parameters

 

Model Suitable Conductor  (mm²) Rated current (A)  Contact resistance (μΩ)  Number of compression cycles Reference weight (kg)

SYG

SYG-35 35 200 ≤150 2 0.12
SYG-70 70 350 ≤120 2 0.25
SYG-120 120 500 ≤100 3 0.42
SYG-185 185 700 ≤90 3 0.68
SYG-240 240 850 ≤80 4 0.95
SYG-400 400 1200 ≤70 4 1.52

 

Detailed technical parameters

 

SYG-70 SYG Compression Equipment Terminal Clamp

Model SYG-70

Suitable conductor cross-section: 70 mm², rated current: 350 A, contact resistance ≤ 120 μΩ, crimping cycles: 2, approximate weight: 0.25 kg

 

Product Features

 

Features of SYG Compression Equipment Terminal Clamp

 

Material: The copper terminal section is made of T2 red copper, which features high purity and low resistivity, ensuring stable current flow and lower temperature rise when connected to equipment copper terminals.

Process: The inner wall of the aluminium sleeve is roll-formed with anti-slip serrations; after crimping, these interlock with the conductor, preventing loosening or slippage during long-term operation under high current.

Corrosion Protection: The surface of the aluminium sleeve is anodised and passivated to form a dense protective film, resisting corrosion from outdoor humidity and dust.

Standards: Strictly complies with the national standards for power line fittings: GB/T 2314, GB/T 2315 and DL/T 693.

 

Contact Us

 

Request samples / customized solutions / project quotations

Email: boogie@jkte888.com

Business Contact: +86 189-2579-5886 (Same number for WhatsApp)

Click "Get a Quote" for one-on-one technical support and project consultation.

 

 

Hot Tags: compression equipment terminal clamp, China compression equipment terminal clamp manufacturers, suppliers, factory

Send Inquiry