How to remove an ADSS Tension Clamp?

Jan 13, 2026

Leave a message

David Smith
David Smith
David is a senior R&D engineer at Guangdong Jinkaite Hardware Plastic Products Co., Ltd. With over 10 years of experience in power distribution product development, he is dedicated to creating innovative and high - quality products, such as overhead line fittings and insulation piercing connectors.

Hey there! As an ADSS Tension Clamp supplier, I've gotten a bunch of questions about how to remove these clamps. So, I thought I'd put together this blog to share some tips and tricks on the process.

First off, let's talk about why you might need to remove an ADSS Tension Clamp. Maybe you're doing some maintenance on the cable, or perhaps you're replacing the clamp itself. Whatever the reason, it's important to do it right to avoid any damage to the cable or the clamp.

Tools You'll Need

Before you start the removal process, you'll need to gather a few tools. Here's a list of what you'll typically need:

  • A set of wrenches: You'll need different sizes depending on the type of bolts used in the clamp. Make sure you have the right ones to avoid stripping the bolts.
  • A cable cutter: In some cases, you might need to cut the cable if it's tightly secured. But be careful, as cutting the cable should be a last resort.
  • Safety gear: This includes gloves, safety glasses, and a hard hat. Safety should always be your top priority when working with electrical equipment.

Step-by-Step Removal Process

Now, let's get into the actual removal process. Here are the steps you should follow:

Step 1: Safety First

Before you touch anything, make sure the power is off. This is crucial to avoid any electrical shocks. If you're not sure how to turn off the power, consult a professional electrician.

Step 2: Inspect the Clamp

Take a good look at the clamp to see how it's attached to the cable. Look for any bolts, nuts, or other fasteners that need to be removed. You might also want to take some pictures of the clamp before you start, just in case you need to refer back to them later.

Step 3: Loosen the Bolts

Using your wrenches, start loosening the bolts that hold the clamp in place. Be careful not to overtighten or undertighten the bolts, as this can cause damage to the clamp or the cable. If the bolts are rusted or stuck, you can use a penetrating oil to help loosen them.

PA70 JPG 4STA JPG 4

Step 4: Remove the Clamp

Once the bolts are loose, carefully remove the clamp from the cable. Be gentle, as the cable might be fragile. If the clamp is still stuck, you can try using a pry bar to gently pry it off. But again, be careful not to damage the cable.

Step 5: Inspect the Cable

After you've removed the clamp, take a close look at the cable to see if there's any damage. Look for any cuts, abrasions, or other signs of wear and tear. If you notice any damage, you'll need to repair or replace the cable before installing a new clamp.

Common Mistakes to Avoid

Here are some common mistakes that people make when removing an ADSS Tension Clamp:

  • Not turning off the power: This is a major safety hazard and can result in serious injury or even death. Always make sure the power is off before you start working.
  • Using the wrong tools: Using the wrong size wrenches or other tools can damage the clamp or the cable. Make sure you have the right tools for the job.
  • Overtightening or undertightening the bolts: This can cause the clamp to loosen or damage the cable. Make sure you tighten the bolts to the correct torque specification.
  • Not inspecting the cable: Failing to inspect the cable for damage can lead to future problems. Always take the time to inspect the cable after removing the clamp.

When to Replace the Clamp

In some cases, you might need to replace the ADSS Tension Clamp instead of just removing it. Here are some signs that it's time to replace the clamp:

  • The clamp is damaged: If the clamp is cracked, bent, or otherwise damaged, it's time to replace it.
  • The clamp is worn out: Over time, the clamp can wear out due to exposure to the elements or normal use. If the clamp is showing signs of wear and tear, it's a good idea to replace it.
  • The clamp is no longer holding the cable securely: If the clamp is loose or not holding the cable tightly, it's time to replace it.

Where to Find Replacement Clamps

If you need to replace your ADSS Tension Clamp, you can find a variety of options on our website. We offer high-quality ADSS Tension Clamp that are designed to meet your needs. We also have other types of clamps, such as Electrical Distribution Anchor Clamp and Dead End Cable Clamp.

Conclusion

Removing an ADSS Tension Clamp can be a tricky process, but with the right tools and knowledge, you can do it safely and effectively. Remember to always follow safety procedures, use the right tools, and inspect the cable for damage. If you have any questions or need further assistance, don't hesitate to contact us. We're here to help you find the right clamp for your needs and ensure that your electrical system is safe and reliable.

If you're in the market for a new ADSS Tension Clamp or any other type of clamp, feel free to reach out to us for a quote. We're happy to work with you to find the best solution for your project.

References

  • Electrical safety guidelines from the National Electrical Code (NEC)
  • Manufacturer's instructions for the ADSS Tension Clamp
Send Inquiry