Product Introduction

JXD-2 bimetallic parallel groove clamp

Suitable for conductor cross-sections of 35–70 mm²; the most widely used small-cross-section parallel groove clamp for standard 10kV distribution networks, suitable for paralleling conductors on urban/rural main lines and street distribution circuits. Features aluminum alloy construction with bolt fastening and easy installation; the preferred fitting for standard small-cross-section conductor connections.

Technical Parameters

Model	Applicable stranded conductor cross-section (mm²)		Main dimensions(mm)				Quality(kg)	Material
Model	Applicable stranded conductor cross-section (mm²)		Main dimensions(mm)				Quality(kg)	Material
	Main conductor	Branch conductor	B	R	L	L1
JXD-1	35～50	35～50	28	7.2	42	50	0.16	Aluminum alloy
JXD-2	70～95	35～50	30	8	50	56	0.19	Aluminum alloy
JXD-3	70～95	70～95	30	8	50	56	0.19	Aluminum alloy
JXD-4	120～150	35～50	36	10	76	86	0.41	Aluminum alloy
JXD-5	120～150	70～95	36	10	76	86	0.41	Aluminum alloy
JXD-6	120～150	120～150	36	10	76	86	0.41	Aluminum alloy
JXD-7	185～240	35～50	40	12	76	86	0.48	Aluminum alloy
JXD-8	185～240	70～95	40	12	76	86	0.48	Aluminum alloy
JXD-9	185～240	120～150	40	12	76	86	0.48	Aluminum alloy
JXD-10	185～240	185～240	40	12	76	86	0.48	Aluminum alloy

Detailed technical parameters

JXD-2 bimetallic parallel groove clamp

Model JXD-2: Main conductor cross-section 70–95 mm²; branch conductor cross-section 35–50 mm²; dimensions B=30 mm, R=8 mm, L=50 mm, L=156 mm; weight 0.19 kg; material: aluminum alloy.

Product Features

Features of JXD bimetallic parallel groove clamp

Material: High-purity die-cast aluminum alloy; features low electrical conduction loss, lightweight design, and excellent elasticity and toughness for secure clamping.

Manufacturing: Integrally die-cast; features a wedge-type spring-loaded self-locking mechanism and precision-milled cable grooves that ensure a secure fit and prevent loosening, eliminating the need for complex crimping.

Corrosion Resistance: Surface-treated with anodic oxidation and passivation to withstand oxidation from rain and electrochemical corrosion in outdoor environments; suitable for overhead distribution networks.

Standards: Complies with national standards for electric power fittings (GB/T2314, GB/T2315, DL/T764, DL/T284) and is suitable for 10kV overhead insulated lines.